mobil:parts:electronics:led_lights_inflatables
Table of Contents
led lights inflataules
prototype|obsolete]
🧩 General Description
Short description: what this part does and where it’s used.
- Category: part:type:other
- Material: …
- Dimensions: …
- Weight: …
- Manufacturing: (extrusion / 3D print / woodwork / …)
- Status: in_stock / prototype / obsolete
🔧 Technical Details
| Parameter | Spec |
|---|---|
| Length | … |
| Width | … |
| Height | … |
| Diameter | … |
| Weight | … |
| Material | … |
| Fastening | (pin / screw / elastic / …) |
| Compatible with | ... |
🧱 Used In
Typical structures/modules using this part:
Lightning/12V Box
Purpose :
- Powers and controls the luminous inflatable system.
How to use :
- Open the box
- Insert one or two batteries on their dedicated rail
- Connect the balloon(s) using the connectors on the box (10 slots available)
- Select ON with the large dial
- ⚠️ NOTE TO BE COMPLETED
- Select OFF when done
Do ✅
- Always select OFF after use, otherwise the batteries will drain
Don't ❌
- Never store discharged batteries — ideally store them at half charge
Circuit breaker :
- If the circuit breaker trips :
- 1. Select OFF on the large dial
- 2. Unplug the device from the 220V outlet
- 3. Press the circuit breaker button to reset it
- 4. Select ON with the large dial, then press the small ON button
. auto-list of pages referencing this part —- ===== 🧰 Assembly & Maintenance ===== * Tools: … * People: … * Time: … * Safety: … * Cleaning / Storage: … —- ===== 📷 Documentation ===== * Photos * Drawings * 3D Model —- ===== 🧍 Designed By ===== Designer(s) Year: … Version: … —- Last updated: date | Category: Parts
mobil/parts/electronics/led_lights_inflatables.txt · Last modified: by yannick