This is an old revision of the document!
Table of Contents
charger
prototype|obsolete]
🧩 General Description
Short description: what this part does and where it’s used.
- Category: part:type:other
- Material: …
- Dimensions: …
- Weight: …
- Manufacturing: (extrusion / 3D print / woodwork / …)
- Status: in_stock / prototype / obsolete
🔧 Technical Details
| Parameter | Spec |
|---|---|
| Length | … |
| Width | … |
| Height | … |
| Diameter | … |
| Weight | … |
| Material | … |
| Fastening | (pin / screw / elastic / …) |
| Compatible with | ... |
🧱 Used In
Typical structures/modules using this part:
. auto-list of pages referencing this part # Charger Box ## Purpose The charger box is used to recharge the portable batteries of the Mobil system. ## How to use ### Standard charge - Open the box - Insert one or two batteries on their dedicated rail - Plug the box into a 220V outlet - Select ON with the large dial - Wait for the batteries to charge - Select OFF when charging is complete Solar charge : * Open the box * Insert one or two batteries on their dedicated rail * Connect the box to the solar panels (yellow connector) * Select SOLAR with the large dial * Wait for the batteries to charge * Select OFF when charging is complete Do ✅ - Always select OFF after use, otherwise the batteries will drain Don't ❌ Never store discharged batteries — ideally store them at half charge Circuit breaker : * If the circuit breaker trips : * 1. Select OFF on the large dial * 2. Unplug the device from the 220V outlet * 3. Press the circuit breaker button to reset it * 4. Select ON with the large dial, then press the small ON button —- ===== 🧰 Assembly & Maintenance ===== * Tools: … * People: … * Time: … * Safety: … * Cleaning / Storage: … —- ===== 📷 Documentation ===== * Photos * Drawings * 3D Model —- ===== 🧍 Designed By ===== Designer(s) Year: … Version: … —- Last updated: date | Category: Parts