prototype|obsolete]

Short description: what this part does and where it’s used.

• Category: part:type:other
• Material: Plastic, Aluminium, electronics
• Dimensions: 40x60x28cm
• Weight:
• Manufacturing: (Aluminium cutting & drilling, electrical assembly & wiring)
• Status: in_stock / prototype / obsolete

# Battery Box

## Purpose The battery box provides 220V power to devices and tools using batteries.

• How to use
• Open the box
• Insert one or two batteries on their dedicated rail
• Select ON with the large dial, then press the small ON button
• Plug your device/tool into the 220V outlet on the outside of the box
• If a single inserted battery runs low during use, insert another battery on the second rail and remove the first one
• When finished, select OFF with the large dial

Don't ❌

• - Never store discharged batteries — ideally store them at half charge

Do ✅

• - Always select OFF after use, otherwise the batteries will drain

• - Circuit breaker :
• If an overpowered device is connected (+800W), the circuit breaker will trip :
• 1. Select OFF on the large dial
• 2. Unplug the device from the 220V outlet
• 3. Press the circuit breaker button to reset it
• 4. Select ON with the large dial, then press the small ON button

Typical structures/modules using this part:

• ...
• ...

. auto-list of pages referencing this part —- ===== 🧰 Assembly & Maintenance ===== * Tools: … * People: … * Time: … * Safety: … * Cleaning / Storage: … —- ===== 📷 Documentation ===== * Photos * Drawings * 3D Model —- ===== 🧍 Designed By ===== Designer(s) Year: … Version: … —- Last updated: date | Category: Parts