This is an old revision of the document!
Table of Contents
Battery Box - Inverter
prototype|obsolete]
🧩 General Description
Short description: what this part does and where it’s used.
- Category: part:type:other
- Material: Plastic, Aluminium, electronics
- Dimensions: 40x60x28cm
- Weight:
- Manufacturing: (Aluminium cutting & drilling, electrical assembly & wiring)
- Status: in_stock / prototype / obsolete
🔧 Technical Details
| Parameter | Spec |
|---|---|
| Length | … |
| Width | … |
| Height | … |
| Diameter | … |
| Weight | … |
| Material | … |
| Fastening | (pin / screw / elastic / …) |
| Compatible with | ... |
# Battery Box
## Purpose The battery box provides 220V power to devices and tools using batteries.
## How to use - Open the box - Insert one or two batteries on their dedicated rail - Select ON with the large dial, then press the small ON button - Plug your device/tool into the 220V outlet on the outside of the box - If a single inserted battery runs low during use, insert another battery on the second rail and remove the first one - When finished, select OFF with the large dial
## Do / Don't
Do ✅ - Always select OFF after use, otherwise the batteries will drain
Don't ❌ - Never store discharged batteries — ideally store them at half charge
## Circuit breaker : - If an overpowered device is connected (+800W), the circuit breaker will trip : 1. Select OFF on the large dial 2. Unplug the device from the 220V outlet 3. Press the circuit breaker button to reset it 4. Select ON with the large dial, then press the small ON button
🧱 Used In
Typical structures/modules using this part:
. auto-list of pages referencing this part —- ===== 🧰 Assembly & Maintenance ===== * Tools: … * People: … * Time: … * Safety: … * Cleaning / Storage: … —- ===== 📷 Documentation ===== * Photos * Drawings * 3D Model —- ===== 🧍 Designed By ===== Designer(s) Year: … Version: … —- Last updated: date | Category: Parts