This is an old revision of the document!
Table of Contents
Battery Box - Inverter
prototype|obsolete]
🧩 General Description
Short description: what this part does and where it’s used.
- Category: part:type:other
- Material: Plastic, Aluminium, electronics
- Dimensions: 40x60x28cm
- Weight:
- Manufacturing: (Aluminium cutting & drilling, electrical assembly & wiring)
- Status: in_stock / prototype / obsolete
🔧 Technical Details
| Parameter | Spec |
|---|---|
| Length | … |
| Width | … |
| Height | … |
| Diameter | … |
| Weight | … |
| Material | … |
| Fastening | (pin / screw / elastic / …) |
| Compatible with | ... |
# Battery Box
## Purpose The battery box provides 220V power to devices and tools using batteries.
## How to use - Open the box - Insert one or two batteries on their dedicated rail - Select ON with the large dial, then press the small ON button - Plug your device/tool into the 220V outlet on the outside of the box - If a single inserted battery runs low during use, insert another battery on the second rail and remove the first one - When finished, select OFF with the large dial
## Do / Don't
Do ✅ - Always select OFF after use, otherwise the batteries will drain
Don't ❌ - Never store discharged batteries — ideally store them at half charge
## Circuit breaker *If an overpowered device is connected (+800W), the circuit breaker will trip : *1. Select OFF on the large dial *2. Unplug the device from the 220V outlet *3. Press the circuit breaker button to reset it *4. Select ON with the large dial, then press the small ON button
🧱 Used In
Typical structures/modules using this part:
. auto-list of pages referencing this part —- ===== 🧰 Assembly & Maintenance ===== * Tools: … * People: … * Time: … * Safety: … * Cleaning / Storage: … —- ===== 📷 Documentation ===== * Photos * Drawings * 3D Model —- ===== 🧍 Designed By ===== Designer(s) Year: … Version: … —- Last updated: date | Category: Parts