charger

part type:other

Short description: what this part does and where it’s used.

• Category: part:type:other
• Material: …
• Dimensions: …
• Weight: …
• Manufacturing: (extrusion / 3D print / woodwork / …)
• Status: in_stock / prototype / obsolete

Typical structures/modules using this part:

• ...
• ...

Charger Box

Purpose : The charger box is used to recharge the portable batteries of the Mobil system.

How to use :

Standard charge :

• Open the box
• Insert one or two batteries on their dedicated rail
• Plug the box into a 220V outlet
• Select ON with the large dial
• Wait for the batteries to charge
• Select OFF when charging is complete

Solar charge :

• Open the box
• Insert one or two batteries on their dedicated rail
• Connect the box to the solar panels (yellow connector)
• Select SOLAR with the large dial
• Wait for the batteries to charge
• Select OFF when charging is complete

Do ✅ - Always select OFF after use, otherwise the batteries will drain

Don't ❌ Never store discharged batteries — ideally store them at half charge

Circuit breaker :

• If the circuit breaker trips :
• 1. Select OFF on the large dial
• 2. Unplug the device from the 220V outlet
• 3. Press the circuit breaker button to reset it
• 4. Select ON with the large dial, then press the small ON button

• Tools: …
• People: …
• Time: …
• Safety: …
• Cleaning / Storage: …

• Photos
• Drawings
• 3D Model

Designer(s) Year: … Version: …

Last updated: date | Category: Parts