Differences

This shows you the differences between two versions of the page.

--- mobil:assemblies:structures:cube [2026/02/24 18:20] – created - external edit 127.0.0.1
+++ mobil:assemblies:structures:cube [2026/06/22 17:34] (current) – yannick
@@ Line 1: / Line 1: @@
-====== cube ======
+====== Cube ======
-<html>
+{{tag>assembly structure base}}
-<iframe src="/model-viewer/index.html"
-        width="100%" height="600" style="border:0;"></iframe>
-</html>
+//The basic building block of the MoBil system — a 1,33 m aluminium tube-and-connector frame. Support, visibility, shelter or stage, depending on what you mount on it.//
-{{tag>structure base}}
+  * **Type:** Structure
+  * **Status:** In use
+  * **Primary function:** support / visibility / shelter / stage
+===== 1. At a glance =====
-====== Description ======
+^ Specification      ^ Value          ^
-The cube: the basic building block of our MoBil system.
+| Footprint          | 1,33 x 1,33 m  |
+| Height             | 1,33 m         |
+| Volume             | 2,35 m3        |
+| Total weight       | 30,7 kg        |
+| Assembly time      | 1 person 10 min - 2 people 5 min |
+| People needed      | 1-2            |
+| Tools              | Hammer (optional, for pins) |
-**Type:** Structure
+===== 2. 3D model & steps =====
-**Primary function:** (support / visibility / shelter / stage / …)
-^ Specification ^ Value ^
+{{url>https://mobil.brussels/wiki/three-viewer/viewer/index.html?p=cube 100%,720px noborder noscroll}}
-| **Length (L)** | 1,4 m |
-| **Width (W)** | 1,4 m |
-| **Height (H)** | 1,4 m |
-| **Footprint** | 1,96 m² |
-| **Total weight** | … kg |
-====== Parts Used ======
+//If the model doesn't load, [[https://mobil.brussels/wiki/three-viewer/viewer/index.html?p=cube|open it in a new tab]].//
-^ Component ^ Qty ^ Notes ^
-| [[mobil:parts:core_kit:...|...]] | … | … |
-| [[mobil:parts:core_kit_connector:...|...]] | … | … |
-**Assembly time:** 1 pers - 10 min 2 ppl — 5 min
+===== 3. Parts (bill of materials) =====
-**Tools:** hammer
-**Manual:** [[mobil:manual:start|Assembly Manual]]
-====== Compatible Modules ======
+Everything you need to build one cube. All tubes diameter 50 x 2 mm wall. Click a part for specs and handling.
-  * [[mobil:assemblies:modules:roof|Roof]]
-  * [[mobil:assemblies:modules:hamac|Hamac]]
-====== Media ======
+^ Part ^ Qty ^ Spec ^
-[[mobil:media:photos:[structure_name]|Photos]] · [[mobil:media:drawings:[structure_name]|Drawings]] · [[mobil:media:3d_models:[structure_name]|3D Model]]
+| [[mobil:parts:core_kit:short_tube|Straight tube]]      | 12 | 1329,4 mm |
+| [[mobil:parts:core_kit:long_tube|Diagonal tube (45)]]  | 6  | 1880,1 mm |
+| [[mobil:parts:core_kit:t_connector|T-connector]]       | 16 | 2 per connector node |
+| [[mobil:parts:core_kit:x_connector|X-connector]]       | 8  | 1 per connector node |
+| [[mobil:parts:core_kit:locking_pin|Locking pin]]       | .  | 1 per tube-connector joint |
-====== Designed By ======
+  * **Connector nodes:** 8 (each = 2x T + 1x X)
-[[mobil:people:designers:...|...]] — Year … — Iteration …
+  * **Tubes total:** 18 - **tube length:** 27,23 m
+  * **Tube weight:** 22,2 kg - **connector weight:** 8,6 kg - **total:** 30,7 kg
-----
+//Source: MoBil builder. Locking-pin count to confirm.//
-//Last updated: {{date}} | Structure//
+===== 4. Assembly =====
+The cube is built from 8 corner nodes. Each node = the [[mobil:assemblies:structures:connector|connector]] assembly (2x T + 1x X), joined by tubes.
+  - **Build the 8 connector nodes.** For each: take one T-connector upright (slot up), slide a second T-connector over it downward, slide an X-connector to the middle, rotate to lock.
+  - **Make the bottom square.** Join 4 nodes with 4 straight tubes. Pin each joint.
+  - **Add the 4 uprights.** One straight tube into each bottom node, pointing up.
+  - **Close the top square.** 4 nodes + 4 straight tubes on top of the uprights. Pin.
+  - **Brace with diagonals.** 6 diagonal tubes (45) for load and wind stability. Pin.
+//Each step maps to a stage in the viewer above.//
+===== 5. Safety & correct use =====
+==== Build safety ====
+  * Pinch points at every connector - keep fingers clear when seating joints.
+  * Don't hammer pins with the frame unsupported; seat the joint by hand first.
+==== Use & load limits ====
+  * **Max vertical load (stage/roof):** . kg //(to define / test)//
+  * **Do not climb** the frame unless rated and ballasted.
+  * **Wind:** above . km/h, remove banners/roof and ballast or take down. //(define)//
+  * Never leave a tall configuration up unattended in changing weather.
+==== Ballast / anchoring ====
+  * Footprint anchoring with [[mobil:parts:accessories:water_weight|water weights]] at the base corners for any raised or sail-bearing configuration.
+  * [[mobil:parts:accessories:ropes|Ropes]] to fixed points where available.
+  * Minimum ballast: . kg per corner //(define per configuration)//.
+===== 6. Takedown & storage =====
+  - Remove add-ons and ballast first.
+  - Pull top pins, lift off top square.
+  - Pull uprights.
+  - Break bottom square.
+  - Nodes can stay assembled for next time, or break to flat-pack.
+  * **Packs into:** [[mobil:parts:logistics:normal_bike_trailer|normal bike trailer]] (tubes + euroboxes for connectors).
+  * Store dry. Check pins aren't bent before repacking.
+===== 7. Compatible add-ons =====
+What this cube accepts:
+  * [[mobil:assemblies:addons:roof|Roof]]
+  * [[mobil:assemblies:addons:hamac|Hamac]]
+  * [[mobil:assemblies:addons:banners|Banners]]
+  * [[mobil:assemblies:addons:light_inflatable|Light inflatable]]
+  * [[mobil:assemblies:addons:cinema_screen|Cinema screen]]
+//Larger version: [[mobil:assemblies:structures:double_cube|Double cube]].//
+===== 8. Media & credits =====
+  * Photos - Drawings - Exploded diagram
+  * Linked: [[mobil:assemblies:structures:connector|Connector]] (the core joint)
+//Designed by . - Year . - Iteration . - Last updated: .//