Differences

This shows you the differences between two versions of the page.

--- mobil:assemblies:structures:basketball_animal [2026/03/25 11:03] – created yannick
+++ mobil:assemblies:structures:basketball_animal [2026/06/23 09:06] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
-====== [STRUCTURE NAME] ======
+====== Basketball Animal ======
-{{tag>assembly:structure [sport]}}
-====== Description ======
+{{tag>assembly structure sport}}
-what isit, what does it do
-**Type:** Structure
+//A sport structure built from the 1,33 m module — frame plus mounted panels for basketball play. Built flat, then tilted upright and ballasted.//
-**Primary function:** (support / visibility / shelter / stage / …)
-^ Specification ^ Value ^
+  * **Type:** Structure
-| **Length (L)** | … m |
+  * **Status:** In use
-| **Width (W)** | … m |
+  * **Primary function:** sport / play
-| **Height (H)** | … m |
-| **Footprint** | … m² |
-| **Total weight** | … kg |
-====== Parts Used ======
+===== 1. At a glance =====
-^ Component ^ Qty ^ Notes ^
-| [[mobil:parts:core_kit:...|...]] | … | … |
-| [[mobil:parts:core_kit_connector:...|...]] | … | … |
-**Assembly time:** 2 ppl — … min (4 ppl — … min)
+^ Specification      ^ Value          ^
-**Tools:** hex key, mallet, level
+| Footprint          | 3,99 x 3,99 m  |
-**Manual:** [[mobil:manual:start|Assembly Manual]]
+| Height             | 3,99 m         |
+| Volume             | 63,44 m3       |
+| Total weight       | 133,3 kg       |
+| Assembly time      | . //(to define)// |
+| People needed      | . //(to define)// |
+| Tools              | Hammer (optional, for pins) |
-====== Compatible Modules ======
+===== 2. 3D model & steps =====
-  * [[mobil:assemblies:modules:roof|Roof]]
-  * [[mobil:assemblies:modules:hamac|Hamac]]
-====== Media ======
+{{url>https://mobil.brussels/wiki/three-viewer/viewer/index.html?p=basketbal 100%,720px noborder noscroll}}
-[[mobil:media:photos:[structure_name]|Photos]] · [[mobil:media:drawings:[structure_name]|Drawings]] · [[mobil:media:3d_models:[structure_name]|3D Model]]
-====== Designed By ======
+//If the model doesn't load, [[https://mobil.brussels/wiki/three-viewer/viewer/index.html?p=basketbal|open it in a new tab]].//
-[[mobil:people:designers:...|...]] — Year … — Iteration …
-----
+===== 3. Parts (bill of materials) =====
-//Last updated: {{date}} | Structure//
+Everything you need to build one basketball animal. All tubes diameter 50 x 2 mm wall. Click a part for specs and handling.
+^ Part ^ Qty ^ Spec ^
+| [[mobil:parts:core_kit:short_tube|Straight tube]]      | 46 | 1329,4 mm |
+| [[mobil:parts:core_kit:long_tube|Diagonal tube (45)]]  | 35 | 1880,1 mm |
+| [[mobil:parts:core_kit:t_connector|T-connector]]       | 56 | 2 per connector node |
+| [[mobil:parts:core_kit:x_connector|X-connector]]       | 28 | 1 per connector node |
+| [[mobil:parts:core_kit:locking_pin|Locking pin]]       | .  | 1 per tube-connector joint |
+| [[mobil:parts:accessories:basketball_panel|Panel]]     | 14 | 1329,4 x 1329,4 mm //(panel mix to confirm: basketball + side panels)// |
+  * **Connector nodes:** 28 (each = 2x T + 1x X)
+  * **Tubes total:** 81 - **tube length:** 126,95 m
+  * **Tube weight:** 103,3 kg - **connector weight:** 30,0 kg - **total:** 133,3 kg
+//Source: MoBil builder. Locking-pin count and panel mix to confirm.//
+===== 4. Assembly =====
+Built flat as the animal profile, then tilted upright. Each node = the [[mobil:assemblies:structures:connector|connector]] assembly (2x T + 1x X), joined by tubes.
+  - **Lay out the profile.** Set the basketball-structure profile flat on the ground.
+  - **Connect.** Join all connectors with tubes except the top-right and top-left node.
+  - **Build up.** Add verticals and diagonals to the connected nodes.
+  - **Close the top surface** with tubes.
+  - **Mount the basket panels.** Add tubes to the remaining ground nodes, mounting the [[mobil:parts:accessories:basketball_panel|basketball panels]] sideways.
+  - **Add side panels** where wanted.
+  - **Tilt 90.** Stand the structure upright on its hinge.
+  - **Add the base** for stability with [[mobil:parts:accessories:water_weight|water weights]].
+//Each step maps to a stage in the viewer above.//
+===== 5. Safety & correct use =====
+==== Build safety ====
+  * Pinch points at every connector - keep fingers clear when seating joints.
+  * Don't hammer pins with the frame unsupported; seat the joint by hand first.
+  * Tilting a tall frame upright needs enough hands - never lift it short-handed.
+==== Use & load limits ====
+  * **Max impact / hanging load (hoop, panel):** . kg //(to define / test)//
+  * **Do not climb** the frame or hang off the hoop unless rated and ballasted.
+  * **Wind:** above . km/h, remove panels and ballast or take down. //(define - panel sail area)//
+  * Never leave the structure up unattended in changing weather.
+==== Ballast / anchoring ====
+  * Footprint anchoring with [[mobil:parts:accessories:water_weight|water weights]] at the base corners - mandatory; play loads are dynamic.
+  * [[mobil:parts:accessories:ropes|Ropes]] to fixed points where available.
+  * Minimum ballast: . kg per corner //(define per configuration)//.
+===== 6. Takedown & storage =====
+  - Remove ballast and panels first.
+  - Tilt the frame back down flat before breaking joints.
+  - Pull top pins, lift off the top surface.
+  - Pull verticals and diagonals.
+  - Break the base. Nodes can stay assembled for next time, or break to flat-pack.
+  * **Packs into:** [[mobil:parts:logistics:normal_bike_trailer|normal bike trailer]] (tubes + euroboxes for connectors); panels separately.
+  * Store dry. Check pins aren't bent before repacking.
+===== 7. Compatible add-ons =====
+What this structure accepts:
+  * [[mobil:assemblies:modules:basket_hoop|Basket hoop]]
+===== 8. Media & credits =====
+  * Photos - Drawings - Exploded diagram
+  * Linked: [[mobil:assemblies:structures:connector|Connector]] (the core joint)
+//Designed by . - Year . - Iteration . - Last updated: .//